PRO-LITE™ HOSE - For use with Swivel-Seal™, Ano-Tuff™, Auto-Fit™, and Auto-Mate™ Hose Ends

Serious racers and street performers can benefit from the light weight, durability and temperature characteristics of our Pro Lite 350™ hose. With a maximum pressure rating of 350 psi and an operating temperature range of -40º F to +300º F, the Pro Lite 350™ hose can take the most demanding conditions and still deliver you to the winners circle. Replacing the existing steel braided oil, fuel and coolant hoses on a typical circle track car can save you as much as 30 lbs!
The Pro Lite 350™ hose has a tough, abrasion resistant Nylon sheathing, bonded to the textile inner braid embedded in the synthetic rubber liner. This gives the hose incredible flexibility while maintaining the ability to withstand high vacuum (27 inches/hg) and hot oil temperatures. Pro Lite 350™ hose has been specifically designed to use EARL’S Swivel Seal™, Auto-Fit™ and Auto Crimp™ Hose ends exclusively. The use of other manufacturers hose ends is not recommended and may compromise the pressure capabilities and durability of the hose.

The Inner Liner constructed from synthetic rubber
tube, clean and fast flowing, provides constant flow
at operating temperatures from -40° to +300 F.
Partial coverage textile inner braid is embedded outside inner liner. Full Coverage Outer Braid of Nylon
bonded to the hose liner provides 350
PSI maximum pressure capabilities,
while maintaining the durability and
flexibility that is responsible for the
Pro-Lite 350™ hose.
 
SizeTypical Application
-4 Small Oil & Fuel Lines, Pressure Gauges, Vacuum Lines
-6 Carburetor, Fuel & Oil Lines
-8 Water, Fuel & Oil Lines
-10 Oil & Fuel Lines, Heater Hoses
-12 Water, Fuel & Oil Lines, Heater Hoses
-16 Water, Dry Sump & Fuel Lines, Heater Hoses
-20 Fuel, Water & Radiator Lines

Hose Size AN Internal Diameter Maximum Operating Pressure(PSI) * Burst Pressure(PSI) Minimum Bend Radius Bulk Part No.
-4 7/32" - 5.56mm 350 1400 2" 350004  
-6 11/32" - 8.75mm 350 1400 2.5" 350006  
-8 7/16" - 11.12mm 350 1400 3.5" 350008  
-10 9/16" - 14.32mm 350 1400 4" 350010  
-12 11/16"- 17.33mm 350 1400 4.5" 350012  
-16 7/8" - 22.20mm 300 1200 5.5" 350016  
-20 11/8" - 28.55mm 250 1000 8" 350020  
             
* When used with Swivel-SealTM hose ends.      
NOTE: Earl's reserves the right to substitute hose of comparable or improved quality.

Site Map | Privacy Policy| Earl's Performance Products UK Ltd