Fuel Filters & Valves

Earl's in–line 35 micron sintered bronze element fuel filter can be easily disassembled for inspection and cleaning. Available with size 6 or 8 AN, or hose barb end Fittings for use with Earl's high performance fuel line and fittings. Blue anodized finish makes this a hi–tech looking as well as practical addition to any engine. Sintered bronze filter elements also sold separately. 4 to 5 GPM flow.

Part Number Fittings Size Filter
230103 Barb 5/16"-3/8" 35 Micron
Part Number Fittings Size Filter
230106 -6 Male 35 Micron
230108 -8 Male 35 Micron
230204 -4 Male 85 Micron
230206 -6 Male 85 Micron
230208 -8 Male 85 Micron
230210 -10 Male 85 Micron
230212 -12 Male 85 Micron
230216 -16 Male 85 Micron
Part Number Description
230107 Element Only 35 Micron

Flapper Check Valves

Part Number
Fittings Size
253004 -4
253006 -6
253008 -8
253010 -10
253012 -12
Features
Zero Leakage (Less Than 1 D.PM.)
Full Flow with Opening Pressure

Specifications
Service Application: Water, Fuel, Oil
Temperature Range: -70F to 350F
Type of Port: Male 37 Flare with SAE thread

Materials
Body and cap: 6061 T6 Aluminium Alloy - Hard Anodized
Internal Parts: 6061 T6 Aluminium Alloy - Hard Anodized and Stainless Steel
Seal: Aluminium Crush Washer
Seat: Reinforced Viton

Pressure Range: 350 P.S.I.
Internal Leakage: .01 cc/min. Max
Mounting: Hinge Facing Up

Shut-Off Valves

    300PSI Max
    Ideal for use as:

  • Emergency shut off valve
  • Anti-theft device
  • Drain valve
       
Part No Inlet Thread Outlet Thread Overall Length Material of Body
230501 3/8NPT Fem 3/8NPT Fem 1-3/4" Chrome Plated Brass

       
Part No Inlet Thread Outlet Thread Overall Length Material of Body
230502 3/8NPT Fem -6 Bulkhead 2-3/4" Red Anodized Aluminium

       
Part No Inlet Thread Outlet Thread Overall Length Material of Body
230503 3/8NPT Fem -8 Bulkhead 2-3/4" Red Anodized Aluminium

       
Part No Inlet Thread Outlet Thread Overall Length Material of Body
230504 1/2NPT Fem 1/2NPT Fem 2-1/4" Chrome Plated Brass

       
Part No Inlet Thread Outlet Thread Overall Length Material of Body

230505

 

1/2NPT Fem -10 Bulkhead 2-3/4" Red Anodized Aluminium

 

Fuel Tank Breather Valves

All fuel tanks need venting. These aluminium breather valves will allow air into the tank without allowing fuel to escape. Designed with a unique 2-ball valve system and attaching to the tank with a 9/16” UNF bulkhead thread and locknut, they are capable of dealing with fuel, air and gas under most service conditions. Available in red anodised aluminium. Catalogue part number BREATHE-FT.

 

 

 

Site Map | Privacy Policy| Earl's Performance Products UK Ltd